PARTS OF TELESCOPE：
1.Main tube
2.Diagonal prism
3.Diagonal prism holding screw
4.Eyepiece lens
5.Eyepiece holding screw
6.Tripod holder
7.Tripod platform
8.Tripod securing screw
9.Focus wheel
10.Mount adjustment Handle
11.Tripod leg
ASSEMBLY:
Take the tripod out of the pouch and extend the legs(11).Put the Tripod holder(6) of the Main Tube(1) on to the tripod platform(7) and tighten it together with the Tripod securing screw(8),make sure the tube is piace on right direction as shown in the diagram.
Place the Diagonal prism(2) to the Tube(use the chromed end)and tighten with the Holding screw(3).Place the eyepiece with the lowest magnification(K17.5) in to the Prism and tighten with the Screw(5).Loose the Mount adjustment handle to adjust the direction where you want then adjust the Focus wheel(9) the get clear and sharp viewing.
MAGNIFICATION
Changing the Eyepieces will change the power or magnification(see the EYEPIECE CHART above).Focus
re-adjustment may be required.
HOW TO CARE YOUR TELESCOPE
All ways keep you Eyepiece Lens in the Pouch.
Use lens cloth or soft and lintless cloth when cleaning or wipin the lenses.
Never attempt to clean the telescope internally or take it apart.
CAUTION
DO NOT LOOK AT THE SUN THROUGH TELESCOPE YOU MAY PERMANENTLY BLIND YOURSELF!!!