选择题(共6分):
下面哪种网络设计无须使用终结器?( )2分
a. 环形
b. 总线
c. 星形
d. 以上都要使用终结器
e. 以上都不必使用终结器
在哪种网络中包可能发生冲突?( )2分
a. 令牌环网
b. technet
c. 以太网
d. WAN但不包括LAN
100Base-X使用下面哪种技术?( )2分
a. CSMA/CD
b. 需求优先权
c. 隧道
d. SNA
填空题 (每空1.5分,共12分) :
请完成以下OSI七层模型:
2.写出三个关系数据库软件: 1. 2. 3.
问答题(共68分):
描述TCP建链的过程。7分
IP地址由哪几部分组成?画出各类网络地址的格式。192.168.12.32为哪一类IP地址?
10分
简叙电阻、电容、电感的作用(针对工作频率不同来说明)10分
简叙稳压源给5V设备通电的开电和断电顺序,试用两个最大30V输出的电源给公司所有的-48V设备供电,并给出图例。10分
三极管作为开关是工作在哪两个区。以下是二极管的钳位电路图和输入波形,试画出输出波形。10分
谐振有哪两种,并描叙它们之间阻抗的大小关系。8分
翻译题(共14分)
翻译(9分):
a)The processor core provides the necessary data at the input of the processor flip-flop (Dp).
b)System clock edge 1 (clk in) is transmitted through the clock buffer and propagates down a transmission line and latches that data from Dp to the output Qp at the processor.
c)The signal on Qp propagates down the line to Dc and is latched in by clock edge 2. The data is then available to the core of the chipset.
2.翻译(8分):
RPC PROTOCOL REQUIREMENTS
The RPC protocol must provide for the following:
(1) Unique specification of a procedure to be called.
(2) Provisions for matching response messages to request messages.
(3) Provisions for authenticating the caller to service and
vice-versa.
Besides these requirements, features that detect the following are
worth supporting because of protocol roll-over errors, implementation
bugs, user error, and network administration:
(1) RPC protocol mismatches.
(2) Remote program protocol version mismatches.
(3) Protocol errors (such as misspecification of a procedure's
parameters).
(4) Reasons why remote authentication failed.
(5) Any other reasons why the desired procedure was not called.
拔高题(共 10 分)
简述交换机与hub(集线器)的区别。5分
简述三层交换机与路由器的区别。5分不用都会做的,能做一半就可以了
再就是要突出他在电路这块的能力
最好能有点实际动手的能力
电子、电路这块,一些测试仪表等等呢 信号传输的一些测试
谢谢你!!!不过IP地址到底是5类还是3类??
D类是组播地址
选择是单选